1 Topic by susankeeton

  • susankeeton
  • New member
  • Offline
  • From: ERIC North East
  • Registered: 07-07-2014
  • Posts: 4

Topic: LCValidation Batch Update has stopped working

With our latest update to Windows 7 the LCValidation Batch Update doesn't seem to recognise the data in the csv files.  When I run the update it says the changes have been made but the records do not show the changes.  Does anyone have any suggestions how I can resolve this?  Or point me in the direction of where I might have messed it up?

Thanks

susankeeton's Website

2 Reply by MikeWeideli

  • MikeWeideli
  • Administrator
  • Offline
  • From: Littlefield Consultancy
  • Registered: 05-07-2006
  • Posts: 2,625

Re: LCValidation Batch Update has stopped working

I doubt if Windows 7 is the cause of this problem. Double check that you have a .csv file by opening it in notepad. If there is nothing obvious I will provide a diagnostic report.

Mike Weideli

MikeWeideli's Website

3 Reply by susankeeton

  • susankeeton
  • New member
  • Offline
  • From: ERIC North East
  • Registered: 07-07-2014
  • Posts: 4

Re: LCValidation Batch Update has stopped working

I opened the .csv file in notepad and there was data present.  Is there anything I should particularly look for?
Thanks

susankeeton's Website

4 Reply by MikeWeideli

  • MikeWeideli
  • Administrator
  • Offline
  • From: Littlefield Consultancy
  • Registered: 05-07-2006
  • Posts: 2,625

Re: LCValidation Batch Update has stopped working

I attach a report which should list what is in the  csv file. Close R6.  Copy the file into the Reports folder. Open R6 and it should be in a menu called Tests.

Post's attachments

LC_Check_Csv_1.xml 884 b, 3 downloads since 2014-07-24 

You don't have the permssions to download the attachments of this post.
Mike Weideli

MikeWeideli's Website

5 Reply by susankeeton

  • susankeeton
  • New member
  • Offline
  • From: ERIC North East
  • Registered: 07-07-2014
  • Posts: 4

Re: LCValidation Batch Update has stopped working

Hi Mike

Thanks so much for the test.  The .csv file came up blank on the test so I tried reformatting the file to text and this has fixed the problem. 

Thanks again for the support.

susankeeton's Website