Ok. I've got a folder on my PC C:\Recorder3 which has in it \Recorder and \Arev312
I expect you only have the \Recorder and inside that \Arev. We have a development version and ours was setup differently.
It seems familiar but I don't think you need to do all these but it should work anyway
F5
Attach C:\Recorder\Codes
Attach C:\Recorder\Data
Attach C:\Recorder\Progs (if you have one)
Attach C:\Recorder\Species
Attach C:\Recorder\System (this might be the only one needed take too much time to check)
Edit LRC_Sys Subdirectories
You should see something like this
G:\Recorder\System
G:\Recorder\Codes
G:\Recorder\Species
G:\Recorder\Data
Edit them to match where your data is and press F9 and esc
Edit Voc Logon
make sure they are all pointing to the current location of the directories. F9 Esc
LOGON - this will attempt to logon and you should see the splash screen of Recorder 3. It will likely not end in recorder starting though so when you get back to the console type; Quit
Restart Recorder the normal way and it should work except you might have the environment error.
Now in recorder go to Utilities\Environment\Hardware\Workstation
Edit your dos path for temporary files. I just created C:\Recorder\Output the Rollout location should be something like C:\Rollout.Sus and that should be fine. F9 to save
That should sort it.
Data Manger
Somerset Environmental Records Centre