1 Reply by cmp260

  • cmp260
  • Member
  • Offline
  • From: wales
  • Registered: 11-05-2006
  • Posts: 30

Re: OS Map tiles on network installation

we have installed Rec 6 network on a windows server 2003 SP2 (64 bit)

When tring to install OS map tiles the application cannot find the Recorder installation.

Any ideas?:(
thanks

CyprianPayne
CCW

cmp260's Website

2 Reply by MikeWeideli

  • MikeWeideli
  • Administrator
  • Offline
  • From: Littlefield Consultancy
  • Registered: 05-07-2006
  • Posts: 2,620

Re: OS Map tiles on network installation

Cyprian

There are lots of issues around this. Initially I suggest you look at the following to narrow down the problem. 

http://forums.nbn.org.uk/viewtopic.php?id=2231

Also http://jncc.defra.gov.uk/page-4648

Mike Weideli

MikeWeideli's Website

3 Reply by cmp260

  • cmp260
  • Member
  • Offline
  • From: wales
  • Registered: 11-05-2006
  • Posts: 30

Re: OS Map tiles on network installation

thanks Mike,
In the first instance I will try the R6 map installer since I had been using r2k2 installer on Cds.
http://jncc.defra.gov.uk/Files/Rec6_OSMapsR6Setup.zip
however, it is asking for unlock code, unlock file or unlock text.

Presumably since CCW are licensed to use all the map tiles, we are entitled to a means of unlocking them in R6 (this was not required in r2k2). Can you tell me how can we get these codes?

thanks
Cyprian

CyprianPayne
CCW

cmp260's Website

4 Reply by MikeWeideli

  • MikeWeideli
  • Administrator
  • Offline
  • From: Littlefield Consultancy
  • Registered: 05-07-2006
  • Posts: 2,620

Re: OS Map tiles on network installation

Cyprian

I think you will need to ask the NBN re this. The software even in R2002 required a free code supplied by them.  If you still have a R2002 system with the Map tiles you can load the .gsf files directly from R2002  into Recorder 6 without  the need to use the CD.

Mike Weideli

MikeWeideli's Website